Coolers and Cooler kit

MOTOR:

  • Completely sealed motor
  • Rigid babbit bush with permanent lubrication
  • Precision machined end shield contribute to accurate
    bearing alignment to minimize starting friction & reduce loading
  • Built to withstand voltage fluctuations
  • Closed cases and water slinger to prevent water entry
  • Pressure diecast balanced aluminum rotors
  • Wide range (1/4 HP to 1/16 HP)
 

FAN:

  • Higher air delivery
  • Silent operation
  • Built in reliability
  • Low power consumption
  • Available sizes 16”/18”/20”

PUMP:

  • Ideal design for max. cooling
  • Suitable for 1-8 ft. head
 

MOTOR

 

APL No Application HP FLA RPM SPEED MOUNTING
D068 16'' Desert cooler motor 1/16 0.53 1400 Two case Bolt Mount
D539 18'' Desert cooler motor 1/13 0.68 1380 Two case Bolt Mount
D319N 16" Plastic Blade Motor for 5 leaf Blade 1/9 1.0 1400 Three Ring mount
D079 20'' Cooler Fan Motor 1/7 1.1 1350 Three Ring mount
D080 16" Climatizer Motor For 4 leaf Blade 1/7 1.2 1400 Three Ring mount
D167 20'' Desert Cooler for 4 leaf Blade 1/7 1.0 1400 Three case Bolt Mount
29SADX162 LD complete cooler kit with 20'' blade 1/7 1.0 1400 Three Pad mounting
D183 Double Blower plastic body cooler motor 1/6 1.3 1260 Three Base resilient
D276 16" Climatizer cooler motor(6 Leaf blade) 1/7 1 1400 three case Bolt mount
D285 18" Exhaust Fan Motor 1/4 1.6 1380 Three Ring mount
D324 18'' Exaust fan motor 1/4 1.6 1380 Single Ring mount
39KGCC435T 18" Exhaust Motor 1/4 1.6 1380 Three Pad mount
NF155 24'' Exhaust Fan motor 0.67 2.3 930 Single Pad mount
 

FAN

 

APL NO. DESCRIPTION HP FLA RPM SPEED MOUNTING
29SAGXO15 HD Complete cooler kit with 20" blade 1/7 1 1400 Three Pad Mount
29SAEX125 LD Complete cooler kit with 20" blade 1/7 1 1400 Three Pad Mount
29SAGX137 Complete cooler kit with 16" Climatizer blade (4 leaf) 1/7 1 1400 Three Pad Mount
29SAGX138 Cooler motor with 16" Climatizer blade (4 leaf) 1/7 1 1400 Three Pad Mount
29SAKX157 Complete cooler kit with 18" Climatizer blade 1/4 1.6 1350 Three Pad Mount
39KGCX179 18'' exhaust fan with 4 leaf blade 1/4 1.6 1380 Three Pad Mount
39KGCX180 18'' exhaust fan with 4 leaf blade 1/4 1.6 1380 Three Pad Mount
 

PUMPS

 

APL NO. RATED POWER INPUTS(WATTS) FLOW RATE MAX.HEAD
    3ft 4ft 5ft 8ft  
PO62 18 Watts 8-10LPM 6-8LPM Max.Head   5ft
PO63 20 Watts 8-10LPM 6-8LPM 4-6LPM Max.Head 6ft
 
 
* Performance subject to the tolerance as mentioned in IS: 2312 - 1967
* All above products run on 170 - 250 V, 1 - phase, 50 Hz AC supply
* Alterations in shaft length. shaft diameter, voltage, frequency and speeds possible, Double shaft variable

Site Map   © Regal Beloit Corporation